Vinyl Flooring Prices in Calgary
| Item | Price range | Typical | What moves the price |
|---|---|---|---|
| Vinyl / luxury vinyl plank (LVP) | $8–$15 / sq ft | $10–$12 | Thicker wear layers and rigid cores sit at the top of the range |
| Old flooring removal (add-on) | $0.50–$3 / sq ft | — | |
| Subfloor preparation (add-on) | $1–$4 / sq ft | — | |
| Stairs — vinyl plank or carpet | $40–$80 / step | — | |
| Baseboard installation | $2–$5 / linear ft | — |
Vinyl plank starts from about $8 per square foot installed and reaches $15 for premium products. Most Calgary homes land at $10 to $12 — enough for a solid rigid core and a wear layer that will survive a family.
What Moves Your Price Within the Range
Wear layer
The clear layer on top is the single biggest driver of both price and lifespan. A 12 mil wear layer suits bedrooms and quiet rooms; 20 mil is what we recommend for main floors, kitchens, entries and any home with pets. Stepping up from 12 to 20 mil usually costs a modest amount per square foot and roughly doubles how long the floor looks new in traffic areas.
Core type
Rigid SPC cores cost more than softer WPC or flexible glue-down vinyl, and they are worth it in sunny rooms, large open areas and rentals. WPC costs slightly less and feels softer underfoot.
Plank size and visual quality
Wider, longer planks and more realistic embossed surfaces sit at the top of the range. They also demand a flatter subfloor, which can add preparation cost — a detail cheap quotes often ignore.
Format
Click-together planks install faster than glue-down, which needs adhesive, rolling and a smoother substrate. Sheet vinyl is the least expensive material but requires precise templating in bathrooms and laundry rooms.
The Lines That Sit On Top of the Square-Foot Price
- Removal and disposal: $0.50–$3 / sq ft. Carpet is at the low end; glued-down vinyl or mortar-set tile at the high end.
- Subfloor preparation: $1–$4 / sq ft where needed. Basement slabs and older homes need it most.
- Stairs: $40–$80 / step, since each step is glued, cut and finished with a nosing.
- Baseboard: $2–$5 / linear ft for new primed trim, or quarter-round where the existing baseboard stays.
- Transitions and door trimming at every doorway where the floor height changes.
Example Vinyl Budgets in Calgary
These are illustrative, built from the ranges above rather than quotes for a specific home.
600 sq ft basement
Vinyl plank at $10 to $12 per square foot: $6,000 to $7,200. Removing old carpet at $0.50 to $3: $300 to $1,800. Levelling an older slab at $1 to $4: $600 to $2,400. New baseboard, about 100 linear feet at $2 to $5: $200 to $500. Total: roughly $7,100 to $11,900.
900 sq ft main floor
Vinyl plank at $10 to $12: $9,000 to $10,800. Removal of laminate and carpet: $450 to $2,700. Light subfloor prep on a newer home: $900 to $3,600. A 14-step staircase in matching vinyl at $40 to $80: $560 to $1,120. Total: roughly $10,900 to $18,200.
450 sq ft rental suite
Vinyl plank at the practical end of the range, $8 to $10: $3,600 to $4,500. Removal: $225 to $1,350. Prep: $450 to $1,800. Total: roughly $4,300 to $7,650 — and because planks are replaceable, turnover repairs later are a fraction of a full replacement.
Vinyl Compared With the Alternatives
| Floor | Installed range | Notes |
|---|---|---|
| Vinyl plank | $8–$15 per sq ft | Waterproof, works on concrete, quiet |
| Laminate | From about $7 per sq ft | Cheaper, but not for basements or wet areas |
| Porcelain tile | $8–$15 per sq ft | More durable, colder, needs a membrane on slabs |
| Carpet | $4–$8 per sq ft | Lowest cost, shortest lifespan in traffic |
| Hardwood | $8–$16 per sq ft | Highest resale appeal, not for below grade |
For a full comparison across every material, see our Calgary flooring cost guide.
Where You Can Save on a Vinyl Project
- Keep a flat, well-bonded existing floor and float over it, avoiding removal entirely.
- Use a 12 mil wear layer in bedrooms and 20 mil where the traffic actually is.
- Pull your own carpet before the crew arrives.
- Choose a slightly narrower plank if your subfloor is uneven — it needs less levelling.
- Do the basement and main floor in the same product and the same visit, so mobilization and material ordering happen once.
What not to cut: subfloor levelling, expansion gaps and the quality of the click system. Those are what keep a vinyl floor flat and tight for a decade.
Want a square-footage number before you call? Our flooring calculator turns your room measurements into square footage, a waste allowance, the number of boxes to order and an estimated installed cost.
Getting an Exact Vinyl Quote
Final pricing depends on your specific project — request a free estimate for an exact quote. We measure every room, test concrete for moisture, check what is under the existing floor and give you an itemized estimate with material, removal, preparation, installation, stairs and trim on separate lines — so you can compare it honestly against any other quote.